window roll up in 04 trailblazer
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48242
Printed Date: May 17, 2024 at 10:10 PM
Topic: window roll up in 04 trailblazer
Posted By: uglyb0b
Subject: window roll up in 04 trailblazer
Date Posted: January 21, 2005 at 10:38 AM
this is my first post here to take it easy on me. i recently installed a code ca-640 along with the gmmulti module from peripheral in my 04 trailblazer. everything is peachy.
i would like to add a window roll up module for the front doors. Does anyone recommend a specific make and model? Better yet, has anyone ever done a window module in this particular car?
This is probably a stupid question, but I suppose you cannot control the windows thru the databus can you? Im guessing that regardless of which module I go with, I will have to interrupt the wires at the switch? If anyone has a diagram of the windows in this car that would be great.
Thanks.
Replies:
Posted By: misterjimbo
Date Posted: January 21, 2005 at 11:38 AM
bypasskit.com has a module that does windows up and locks.
-------------
Posted By: uglyb0b
Date Posted: January 21, 2005 at 4:55 PM
are you talking about the dlgm1? really im looking for a simple stand alone unit. i already have the passlock/databus interface with the module i have now.
anyone know if the windows on a 04 trailblazer are easy to interface with? a long time ago, i had a 90 s-10 blazer and all i had to do was interrupt the window wire(s) to install it. im hoping the trailblazer is just as easy?
thanks
|