viper 350 hv in a 92 honda civic
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48290
Printed Date: May 01, 2024 at 2:58 PM
Topic: viper 350 hv in a 92 honda civic
Posted By: hesher16
Subject: viper 350 hv in a 92 honda civic
Date Posted: January 21, 2005 at 10:16 PM
Hi I am new to this sort of thing. I have put in car stereos without factory harnesses, amps, and capacitor's. So i am not totally car dumb, but when it comes to putting the viper 350 hv alarm in my 92 honda civic lx I am stupid. I have read the installation guide over and over and it is like latin to me. Is there any one out there that can explain it in english? I understand about the ignition wire and kinda understand about the keyless entry part but when it comes to the diodes and resistors i am lost . I mean where and how do you install them? Do i have to use the kill start feature of my alarm? Thanks for your time. Please respond if you know how to do this. Oh yeah this will be my first alarm. Thanks for any imput you may have to helping me.
-------------
feel me rollin down the street
if its tourist season why can't we shoot them
Replies:
Posted By: raydawg357
Date Posted: January 22, 2005 at 11:31 AM
Here's the diagram for your car, you won't need any diodes or resistors https://www.directechs.com/directwire/wire_body.asp?action=select&yr=2&product=Remote%20Start ------------- Do it right the first time
Posted By: hesher16
Date Posted: January 23, 2005 at 3:20 AM
hi i am trying to install my first alarm and i have a wiring diagram of my 92 honda civic lx. Usually i would pay some one to do this but money is tight cause i am expecting a new baby. Plus i really want to do this my self. I have taken a weeks vacation off of work to do this and i'll be pretty upset if i can't figure it out before i have to go back to work. Well with that all being said is there any pro installers out there that can explain the installation process for a viper350hv alarm in english. You don't have to be a pro installer just someone who knows more about installing alarms than i do, so that could be any one. lol. I am reading the install manual that came with my alarm and mentions h1/2 and h1/12 what the heck are they talking about. Please if you have the knowledge and time to simply explain this process to me in some detail I would be very greatful, and if you are in columbus ohio and want to come over and help i'd buy you a twelve pack (to drink when you got home). Thanks
-------------
feel me rollin down the street
if its tourist season why can't we shoot them
Posted By: Falcon 1
Date Posted: January 23, 2005 at 8:01 AM
What they are referring to is the individual wire harnesses that came with the alarm. The manual should help identify the harness they are referring to. example--- h1/2 would be harness 1 wire 2. Just take your time and do one at a time and double check every wire with a DMM to make sure its the correct one. Also you should have a tech for your vehicle if you do a search on this site for your vehicle you should find one. Good-Luck. ------------- Do it right the first time, only a doctor can bury his mistakes.
Posted By: JWorm
Date Posted: January 23, 2005 at 10:05 AM
You took a week off from work so you could save the $100 you would pay to have it installed?
Do you have a tech sheet on your car already?
If not, these are the wires you need to tap into:
12volts white + brn conn abv fusebox
Starter BLACK/ white + brn conn abv fusebox
Ignition BLACK / YELLOW + brn conn abv fusebox
Power Lock GREEN / WHITE - in drivers door
Power Unlock GREEN/ red - in drivers door
Notes: Door lock module in door above the speaker. the wires can also be found at the anti-theft if equiped.
Parking Lights+ RED / black grn plug top of f-box
Door Trigger lt GREEN/ red - driver kick panel
Trunk/Hatch Pin grn/blk 2 silv dots - blu conn above fusebox
h1/2 and h1/12 stand for harness 1 - pin 1 and harness 1 - pin 12. Look at the pages in the install guide where it shows the pin layout of the harnesses. You will see the pins labeled with h1/2 and so on.
You are going to need to ask more specific questions.
Posted By: hesher16
Date Posted: January 23, 2005 at 12:14 PM
yes i have a tech sheet but can you tell me what the wire on the harness go to that would be a lot easier
-------------
feel me rollin down the street
if its tourist season why can't we shoot them
Posted By: rallysport
Date Posted: January 23, 2005 at 12:38 PM
i think this is what your looking for?
you should use a digital multimeter to verify all wires before tappin into them just to be sure.
car alarm harness
12volts white + red
Starter BLACK/ white + (cut starter wire in half
green from alarm goes
to key side of wire,
black to stater half)
Ignition BLACK / YELLOW + yellow
Power Lock GREEN / WHITE - green (lock harness)
Power Unlock GREEN/ red - blue (lock harness)
Parking Lights+ RED / black white
Door Trigger lt GREEN/ red - green (main harness)
TrunkPin grn/blk 2 silv dots - blue (main harness)
note the difference of blue and green wires from the mail harness and "lock" harness
-------------
Posted By: gcorrea
Date Posted: January 23, 2005 at 1:38 PM
if not using the kill relay it kindda defeats the purpose of having an alarm. what exactly do you not understand. ask questions get answers. the 350hv is a very basic install. ------------- gcorrea
Posted By: iskidoo
Date Posted: January 23, 2005 at 2:48 PM
try going here for a rough idea on what is involved in your installation. There is a tutorial on there. Look that over because it might be helpful. You picked a pretty advanced system to put in for your first install, I'll tell you that much. Good Luck. heres the link https://members.tripod.com/~alarmtek/MRINSTALL.html
Posted By: hesher16
Date Posted: January 23, 2005 at 8:53 PM
can anyone tellme what this is and what exactly it connects to it's for a viper 350hv. Well i tried to copy the pic from my pc but it was to many kb's. So i will describe it to you. It is a black box thing that has an orange wire and a yellow wire that goes into it from my 12 pin wiring harness. Then it has a thick black and a thick green wire that comes out of it. It looks like some kind of relay but i don't really know what for. Any info would help
-------------
feel me rollin down the street
if its tourist season why can't we shoot them
Posted By: hesher16
Date Posted: January 23, 2005 at 9:49 PM
i am getting help from someone near by i hope ------------- feel me rollin down the street
if its tourist season why can't we shoot them
Posted By: rallysport
Date Posted: January 23, 2005 at 10:02 PM
that is the starter kill relay i descibed the wiring on that above, allthough i can see how you would be confused. green goes to the half of the starter wire that leads to the key. black goes to the other half. yellow goes to the igniton wire (BLACK / YELLOW, reads 12v with key on and about 10 when cranking the engine)
-------------
Posted By: hesher16
Date Posted: January 23, 2005 at 10:07 PM
thank you for you response that will help me a lot i think that i might be able to do this on my own now. I will have to get up a the buttcrack of dawn so that i have enough daylight to do this . But i think i can do this and do it right thanks to all the guys that have helped me in these last couple of day. Thanks
-------------
feel me rollin down the street
if its tourist season why can't we shoot them
Posted By: hesher16
Date Posted: January 25, 2005 at 5:58 AM
i am installing a viper alarm and in the manual it said for parking light circuits that draw 10 amp or more that the jumper had to be switched to (-) so do i need to do that for my 92 honda civic
-------------
feel me rollin down the street
if its tourist season why can't we shoot them
Posted By: dare_ds69
Date Posted: January 25, 2005 at 6:54 AM
just left in positive because your parking lights are positive you can find the wire at the fuse box is RED / black or use the male in the fuse box.  ------------- how own your mind, control your life.
MECP certified. always use a DMM
Posted By: hesher16
Date Posted: January 25, 2005 at 6:56 AM
do you know how i would be able to connect the horn with my alarm ------------- feel me rollin down the street
if its tourist season why can't we shoot them
Posted By: dare_ds69
Date Posted: January 25, 2005 at 7:07 AM
yes the brown wire sends positive so you have to do a relay and program the brain for pulse.
-------------
how own your mind, control your life.
MECP certified. always use a DMM
Posted By: hesher16
Date Posted: January 25, 2005 at 11:11 AM
i have installed a viper 350hv alarm and the power door lock is not working with the remote how do i fix this ------------- feel me rollin down the street
if its tourist season why can't we shoot them
|