CLifford Matrix Starter disable on Nissan

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48335
Printed Date: September 11, 2025 at 10:51 AM

Topic: CLifford Matrix Starter disable on Nissan

Posted By: srusin1
Subject: CLifford Matrix Starter disable on Nissan
Date Posted: January 22, 2005 at 6:26 PM

How does the starter disable get wired up to a Nissan with two starter wires?

Replies:

Posted By: secureauto
Date Posted: January 22, 2005 at 8:42 PM

You can normally use the thicker of the 2, but just in case,let us know which car it is so we can provide you with the correct info. posted_image

-------------
ASE Certified

Posted By: metaverse
Date Posted: January 22, 2005 at 8:55 PM

only one is the starter wire..the other is a starter cold circuit trigger..it tells the ECU to activate cold fuel mapping after getting feedback from the coolant temps sensor.

You will only connect starter disable to the starter wire going to the starter, the first starter wire..the wire that disables the starter from turning over. Ignore the second starter wire for disable (not for starting)

Posted By: srusin1
Date Posted: January 22, 2005 at 9:03 PM

Which wires from the MAtrix 3.5 go to the starter wires?

Posted By: metaverse
Date Posted: January 23, 2005 at 12:20 AM

Look at your other post "Nissan Sentra Clifford 3.5 wont start" No point continuing this thread when I posted the answer there..

Print Page | Close Window