Print Page | Close Window

Command Start Remote Starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48387
Printed Date: May 18, 2024 at 4:04 PM


Topic: Command Start Remote Starter

Posted By: blaker2005
Subject: Command Start Remote Starter
Date Posted: January 23, 2005 at 1:20 PM

Hello

I have a Command Start Remote Starter that does not work anymore.  I can not find the model # on the unit except Command Start 1997.   It is Grey in color.  Does anyone know if other Command Start models can be simply plugged into my vehicle so that I do not have to rewire it?

For example can a Command Start CS260m be plugged into my existing harness.  This unit looks exactly like mine except it is black.  Any help would be appreciated.




Replies:

Posted By: extreme1
Date Posted: January 23, 2005 at 2:48 PM
CS260m is for manual transmissions only


-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta



Posted By: blaker2005
Date Posted: January 24, 2005 at 4:47 PM

What about a Command Start 290i which was made in 1998?

Can this one be used in place of my unit?

Also, I live in St. John's Canada not Chile.




Posted By: velcro
Date Posted: January 29, 2005 at 1:22 PM
what is your vehicle?  do u have a pic of the remote starter brains and remote?



Posted By: gus1
Date Posted: January 29, 2005 at 4:52 PM
Ahhhh... the venerable CS250. Providing the antenna has the 3 pin plug on it, then yes, the 290 will plug right in. If it's the RCA plug atyle of antenna, then you will require a different antenna for the 290ic.

Gus


-------------
Wherever I go, that is where I end up......


Print Page | Close Window