1998 honda CRV, viper 791 xv with rs

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48397
Printed Date: July 06, 2025 at 5:11 PM

Topic: 1998 honda CRV, viper 791 xv with rs

Posted By: ksingh
Subject: 1998 honda CRV, viper 791 xv with rs
Date Posted: January 23, 2005 at 3:41 PM

hey whats up guys i have an install to do in this vehicle and i was looking up the wire diagram for that vehicle and i did alot of honda and never seen this before so if anyone can explain please do really need that help and extra info

i am installing the viper 791 xv with rs

now this i dont understand FACTORY DISARM yellow, IT SAYS DRIVERS KICK PANEL THIS IS IGNITION FOR ALARM USE RELAY i dont get that so if anyone knows please help me out also another thing is

DOOR UNLOCK GREEN/ orange MUST USE RELAYS

i have done alot of hondas and never used relay for disarm nor never use relays for the door locks they are usually negative type doorlock and u just connect the wires

so please guys help me out thanks if any diagrams also please send

-------------
Kenny

Replies:

Posted By: mxxmikexx
Date Posted: January 23, 2005 at 10:29 PM

DEI and Audiovox tech info both say you must use relays on this vehicle for the door locks

couldnt find any info on the disarm wire for you, sorry

-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106

Posted By: ksingh
Date Posted: January 24, 2005 at 6:03 AM

oh ok now would anyone have any idea on how to wire up the relays for the lock and unlock

do anyone out there have a diagram or can give me some help or info on wiring up the relay thank s

-------------
Kenny

Posted By: mxxmikexx
Date Posted: January 25, 2005 at 12:35 PM

https://www.the12volt.com/relays/page1.asp

-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106

Posted By: kgerry
Date Posted: January 25, 2005 at 3:18 PM

the 791 should have come with a 451M relay module for the locks ( at least all our Clifford product does ) instructions come with it....

the disarm thing is you use a relay to open the ign feed to the factory alarm so it doesnt go off when the RS activates... a standard 5 dollar relay and socket will do the trick....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979