viper 790xv alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48445
Printed Date: July 22, 2025 at 6:57 PM
Topic: viper 790xv alarm
Posted By: ty
Subject: viper 790xv alarm
Date Posted: January 24, 2005 at 2:24 AM
Just wondering, my alarm has no input wiring for my remote start harness, this should have came with the alarm right, or do I have to buy the harness seperately? I want to have seperate inputs for my merc switches rather than running both dioded to my trunk input. I need to see if I need to go to the installers and get what's rightfully mine. Thanks
Replies:
Posted By: gus1
Date Posted: January 24, 2005 at 9:40 AM
Soooo..... do you have a 690Xv or a 791Xv? I am confused as to which harness you are talking about. The satellite relay harness? The XCRS itself? The tach/brake/hood/neut. safety/2nd status harness?
Gus
-------------
Wherever I go, that is where I end up......
Posted By: ty
Date Posted: January 24, 2005 at 2:56 PM
As the topic says it is a viper 790 XV alarm, and I am referring to the remote start harness 6 pin H3 harness which includes the hood sensor input. Do you know anything about the 790XV's?
Posted By: Jschult3
Date Posted: January 24, 2005 at 4:27 PM
The 790 does not have the new mini relay as the 791xv does.If you bought it new, Yes, it should have had all the harness's that are required. You need the hood sensor input for the RS to work. Is this a manual car? They may not have included the missing items because of that? I'd definetly go back and ask them where the other parts are. Good Luck ------------- Jeff
Always Verify Wire information before Connecting! Just a Darn Good DIY'R
Posted By: ty
Date Posted: January 25, 2005 at 2:07 AM
cool thanks for answering my question, I went back and they gave me what I thought was it, grey wire, brown wire etc..., but only had 5 pin, I did not even check to see if was 6, so now I gotta go back again, these guys really suck!
Posted By: gus1
Date Posted: January 25, 2005 at 10:04 AM
790 will need the 6pin.... status, hood, brake, neut. safety, tach, and second status.
I have actually hit a couple units that were missing a harness. No biggie, that's what the "parts" boxes are for. And, yes... I know the 790 quite well.
Gus
-------------
Wherever I go, that is where I end up......
|