Print Page | Close Window

’98 Subaru Forester power lock question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48491
Printed Date: May 02, 2025 at 4:24 PM


Topic: ’98 Subaru Forester power lock question

Posted By: DJRr
Subject: ’98 Subaru Forester power lock question
Date Posted: January 24, 2005 at 3:25 PM

Hi huys,
I've got a small problem with an alarm installation on a '98 Subaru Forester. Everything is fine except for the power door locks. I've found the stock module which has 9 wires. I've got the vehicle's wiring codes and it says a white wire and a WHITE/ red wire are the lock/unlock wires. But they don't seem to be right.

The alarm is an older K-9 I guess it's model 5.

If anyone has gone through this vehicle before, please give me out any recommendations.

Thanks a bunch in advance!




Replies:

Posted By: misterjimbo
Date Posted: January 24, 2005 at 3:36 PM
try RED / white for lock and yellow/red for unlock  negative triggers.

-------------


Print Page | Close Window