04 silverado 2500 diesel+555L+456G+791xv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48492
Printed Date: May 02, 2025 at 3:55 AM

Topic: 04 silverado 2500 diesel+555L+456G+791xv

Posted By: lakas187
Subject: 04 silverado 2500 diesel+555L+456G+791xv
Date Posted: January 24, 2005 at 3:54 PM

Hey guys quick qustion,I have the whole alarm workin properly except for the remote start. I don't even think it waits for the *wait to start light to go off* b4 it attempts to remote start the truck,and as soon it starts it dies,my main question is: do both blue wires from the 456G,and the 555L go to the (-) status output from the 791 xv module or separate?

Replies:

Posted By: kps67
Date Posted: January 24, 2005 at 4:06 PM

yes but make sure you diode isolate each of those negative inputs did you connect the wait to start input for the alarm

Posted By: lakas187
Date Posted: January 24, 2005 at 4:11 PM

yes i did.

Posted By: kgerry
Date Posted: January 24, 2005 at 5:04 PM

this unit has 2 status wires... blue and blue/white... use 1 each... did you hook up the wait to start wire?

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: lakas187
Date Posted: January 25, 2005 at 3:51 PM

Nevermind guys, I fixed it It works flawlessly now!

Print Page | Close Window