Compustar Installation problems
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48577
Printed Date: May 18, 2024 at 3:24 AM
Topic: Compustar Installation problems
Posted By: neonman
Subject: Compustar Installation problems
Date Posted: January 25, 2005 at 3:54 PM
Hello, I'm having trouble connecting a compustar to a 1997 Dodge Neon. I bought the unit used from ebay, and I guess it didn't come with the installtion manual. All I really have to go by is the diagram on the module itself. Now, as far as I understand with compustar the dome light supervision needs to be connected for it to work. Will this work if I attache it into the door switch or vice versa? Also, I'm confused about the second harnes which has the following wires: light output, status output, ignition output, accessory output, and starter output. My main concern is that the module says that these wires have a negative polarity so I am not sure if I'm supposed to attach them to their corresponding wires which have a positive polarity.
Any help will be greatly appreciated.
Thanks!
Replies:
Posted By: godsegoizhuge
Date Posted: January 25, 2005 at 6:07 PM
If you goto compustar.org you can get the user manual that you need. As for the 2nd harness with the ign. acc. and starter output is to drive a relay. It's for if your vehicle has a 2nd ign, 2nd acc or 2nd starter that needs to be wired up.
Posted By: Velocity Motors
Date Posted: January 25, 2005 at 8:07 PM
godsegoizhuge wrote:
If you goto compustar.org you can get the user manual that you need. As for the 2nd harness with the ign. acc. and starter output is to drive a relay. It's for if your vehicle has a 2nd ign, 2nd acc or 2nd starter that needs to be wired up.
The site has been updated and there is no longer any links for installation ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: metaverse
Date Posted: January 25, 2005 at 9:46 PM
Go here instead for the manuals Manuals Keep it on the down low..last time I gave a compustar link they killed it...lol
Posted By: godsegoizhuge
Date Posted: January 25, 2005 at 11:34 PM
actually if you click under support and click on the customer support link at the top, it takes you to the page to access the user manual. Or atleast I managed to access it LOL.
Posted By: diggerdoo
Date Posted: January 27, 2005 at 12:52 PM
the user manuals provide no help for wiring. click the link 2 messages above. Thanx metaverse!
|