Print Page | Close Window

Factory rearm on 04 Infniti G35

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48638
Printed Date: May 17, 2024 at 6:07 AM


Topic: Factory rearm on 04 Infniti G35

Posted By: srusin1
Subject: Factory rearm on 04 Infniti G35
Date Posted: January 26, 2005 at 11:12 AM

I think that the factory alarm on a 2004 G35 coupe disarm with a pulse on the unlock wire, what about rearming the factory alarm. Is it a good idea to keep the factory alarm, and how do i go about  doing so?



Replies:

Posted By: riceman
Date Posted: January 26, 2005 at 11:45 AM

The g35 disarms with one pulse to the unlock wire unlock with two pulse. The g35 arms with lock. If your doing an engine start , then i have some advice for you, if one day the RS dosnt work  take the key out of the immobillizer bypass n actually try the key to see if it still even starts the car. I had a problem like that that drove me nuts. A dealer key chip some how was magically erased. Also if you have two aux valdity channels on your alarm tap those wire to the lock n unlock, a longer then one second pulse will roll up/dwn your windows. This is assumming you got the wires inside the drivers door and not at the bcm. good luck





Posted By: srusin1
Date Posted: January 26, 2005 at 11:58 AM
Is there a keysense wire that has to be hooked up, thanks for the advice on the window roll up/down. I putting a Clifford 3.5 saturday, any additional advice?




Posted By: KarTuneMan
Date Posted: January 26, 2005 at 12:27 PM

YES....you need the key sence.

Blk/Pnk in a 40 pin connecter at the BCM drivers kick

Hey.....when your done, let me know how long it took ya, and please be honest. You can PM me with your answer, then Ill tell you how long it took meposted_image



-------------




Posted By: srusin1
Date Posted: February 07, 2005 at 5:26 PM
Any one know if I can get the tach wire inside the car?




Posted By: KarTuneMan
Date Posted: February 07, 2005 at 6:46 PM

YES.....@ the ECU under the glove box, there are 6 poss. wires, they provide a single cylinder reading 

GRN/Red....Gray......Gray/Red....Yellow/Red.....Blue/Red.....PURPLE / Wht

This info is from astroflex.......of course  posted_image



-------------





Print Page | Close Window