Print Page | Close Window

how to program Valet 552t

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48700
Printed Date: July 12, 2025 at 3:17 PM


Topic: how to program Valet 552t

Posted By: Anthnynixon
Subject: how to program Valet 552t
Date Posted: January 27, 2005 at 12:47 AM

I picked up a valet 552t remote starter, peace of cake to install as the truck it was put in to was automatic, with no power option, so just like 7 wires and it was good to go.   Here is my question? When it is remote started the lights flash as its started and running, on my car I have a compustar alarm that once the car is started the light stay on constantly, not flashing. Do anyone know how to program it or a link to where I can find out how to program it?

Thanks



Replies:

Posted By: dare_ds69
Date Posted: January 27, 2005 at 7:21 AM

put the key in the ignition on off and press the valet swich four times and then one more time and hold it ,the led will flash four times, and the press unlock  for constant parking lights or lock for flashing parking lights



-------------
how own your mind, control your life.
MECP certified. always use a DMM




Posted By: kgerry
Date Posted: January 27, 2005 at 8:27 AM
actually if i remember correctly it's the 4th feature in the second menu... press the valet switch and hold it until it flashes twice and the horn (if hooked up) honks twice, then tap the switch 4 times and hold it... this will allow you to change menu 2 - feature 4...

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979




Posted By: Anthnynixon
Date Posted: January 27, 2005 at 1:46 PM
sweet thanks guys, now I just have to find a valet switch the unit didnt come with one, the only ones on ebay are in a bulk of 5 and want 10 bucks for shipping. do you know where I can get one? There is an authorized dealer about 5 miles away, do you know how much one cost?




Posted By: kgerry
Date Posted: January 27, 2005 at 1:49 PM
it should have come with the unit...... a generous dealer in a good mood may just give you one... we have boxes of them here....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979




Posted By: traitorhound
Date Posted: January 27, 2005 at 2:54 PM

you could make a valet switch, all it is a momentary spst NO   switch wired up to its appropriate place if all other options fail






Print Page | Close Window