DEI 516U

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48752
Printed Date: May 14, 2025 at 1:40 PM

Topic: DEI 516U

Posted By: chino
Subject: DEI 516U
Date Posted: January 27, 2005 at 7:53 PM

Hey ....anyone out there can tell me to wire up a relay to boost the ground for this installation...???

installing a 516U Voice Module on a Trojan 500ANS alarm.

was told the ground strenght from the ground ( yellow ) wire off of the starter kill wasn't enough to give the module a proper signal...

was told to drop in a relay...i tried but no luck...

Thing is i have the relay wired...30 = constant .... 85 = Ground , 86 to ORANGE on 516U and 87 to Yellow Ground When armed wire on the Alarm module....as how i thought it should have been done..but no luck....

hellllppp someone....

Replies:

Posted By: auex
Date Posted: January 27, 2005 at 9:49 PM

85 +12V, 86 ground when armed from alarm(starter kill output), 30 ground, 87 output to starter kill and 516U.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: dare_ds69
Date Posted: January 28, 2005 at 6:46 AM

85 as ground, 86 12v from siren wire , 87 gound and 30 goes to 516u

-------------
how own your mind, control your life.
MECP certified. always use a DMM

Posted By: auex
Date Posted: January 28, 2005 at 9:18 AM

He needs to boost the ground when armed not send a ground when the siren is sounding.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: chino
Date Posted: January 28, 2005 at 1:34 PM

thanks Auex...will try it later when i get home...

and let you know how it goes.