Problem with remote
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48775
Printed Date: November 03, 2025 at 9:05 PM
Topic: Problem with remote
Posted By: bigtito21
Subject: Problem with remote
Date Posted: January 28, 2005 at 1:51 AM
I believe i have the viper equivalent to the clifford matrix RS 3.5, i have the clifford remote that has the lcd but i checked my main alarm unit and it says viper. out of the blue my remote stopped working, it would give the feedback as if it was out of range yet i was sitting right inside the car. i can't seem to find a way and reprogram it, i have my friends install manual for the clifford RS 3.5 but it doesn't seem to work for my alarm. i really need help! thanks
Replies:
Posted By: dare_ds69
Date Posted: January 28, 2005 at 6:16 AM
did you mean viper 791xv the blue pager? that you can do is unplug the antena for 5 sec. and plug it back and try it press lock, lock ,lock, if it did not work you have a bad pager you just have to replaced
-------------
how own your mind, control your life.
MECP certified. always use a DMM
Posted By: bigtito21
Date Posted: January 28, 2005 at 7:10 AM
yea i have the viper 791xv but for some reason i have the clifford remote, gunna try what u said about the antenna
Posted By: dare_ds69
Date Posted: January 28, 2005 at 7:15 AM
in that case you have to reprogran the remote.it should work both are the same.
-------------
how own your mind, control your life.
MECP certified. always use a DMM
Posted By: bigtito21
Date Posted: January 28, 2005 at 7:24 AM
actually its the 690xv, i guess they sold me and installed the wrong alarm wasn't able to distinguish which was the antenna cable
Posted By: dare_ds69
Date Posted: January 28, 2005 at 7:48 AM
the 690xv use the same antena the antena should be in the winsheld thas the wire you have to unplug
-------------
how own your mind, control your life.
MECP certified. always use a DMM
Posted By: Teamrf
Date Posted: January 28, 2005 at 8:32 AM
Try disconnecting the alarm completely for a minute or so, and try that. Those things happen all the time for some odd reason. I have to do mine like that every so often.
-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
Posted By: bigtito21
Date Posted: January 30, 2005 at 7:03 PM
still nothing, i guess i'm gunna try and buy a remote for the time being and try programming it, not going back to the city i got it installed for another month, any other suggestions would be great
Posted By: bigtito21
Date Posted: January 30, 2005 at 9:58 PM
can i use the remote without the LCD with my alarm or do i need to have the lcd for it to work
|