2005 Chevy Cargo Van.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48786
Printed Date: July 17, 2025 at 8:00 PM

Topic: 2005 Chevy Cargo Van.

Posted By: dunyamunya
Subject: 2005 Chevy Cargo Van.
Date Posted: January 28, 2005 at 8:21 AM

I am looking for a wiring diagram for 2005 Chevy Cargo Van to install remote start and alarm. Can someone help me and provide information needed?

Thank you in advance,

Andrew.

-------------
Andrew

Replies:

Posted By: Velocity Motors
Date Posted: January 28, 2005 at 9:03 AM

https://www.directechs.com/directwire/wire_body.asp?action=select&yr=5909&product=Remote%20Start#

Super easy vehicle to work on. Only hard wire to access is the tach wire. I used the injector wire instead ( TAN ) at the top of the engine just below the firewall.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: dunyamunya
Date Posted: January 28, 2005 at 9:52 AM

Thank you, Velocity Motors.

-------------
Andrew

Posted By: Velocity Motors
Date Posted: January 28, 2005 at 10:15 AM

One more thing is that you need to use the databus Passlock II bypass module. I tried using the PLZAP ( resistor type module ) and it does work, but the Passlock light stays on. I ended up using the GMBP module for the '05's and it works without errors.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window