Print Page | Close Window

04 siverado question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48862
Printed Date: July 12, 2025 at 7:59 PM


Topic: 04 siverado question

Posted By: Seaco916
Subject: 04 siverado question
Date Posted: January 29, 2005 at 10:13 AM

although i am pretty mechanically inclined the same can't be said about my electronic abilities, and i have very impressed by most posts (both the Q and A)        Anyway thanks in advance for any replies, my question is as follows

I have 2004 chev Silverado extcab (4 dr) with factory keyless and alarm. I purchased and codealarm 425/535 from circuit city, one DEI 456g module and one PLXR, do i have everything i need to install this unit and ditch my factory key FOB?




Replies:

Posted By: Seaco916
Date Posted: January 29, 2005 at 12:23 PM
did i mention that the code alarm is a remote start unit that is the feature i am going for while leaving factory keyless and alarm and using new key fob



Posted By: KarTuneMan
Date Posted: January 29, 2005 at 1:16 PM

Sound to me like your ready to roll, all you'll need that I don't see listed are 4 diodes, to isolate your door pins.

Do you have a tech sheet?  Heres a link!

https://www.directechs.com/directwire/wire_body.asp?action=select&yr=5867&product=Remote%20Start

Good luck



-------------


Print Page | Close Window