05 Mazda tribute wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48991
Printed Date: July 06, 2025 at 11:56 PM

Topic: 05 Mazda tribute wiring

Posted By: techie51
Subject: 05 Mazda tribute wiring
Date Posted: January 30, 2005 at 11:06 PM

I am installing a compustar 900 series in a 05 Mazda Tribute. I could only find 03 wiring diagram for the tribute. The wiring is not the same in most cases. For example I cannot find the door trigger. On the techsoft for the 03 it has the door trigger PURPLE / lt grn. at the cluster or 22 pin GEM. Also the tach wire I am unable to find. I tested each wire at the cylinder on each coil in ac w/ multimeter but doesn't show correct voltage. It will only show 12V in DC only for those wires. Has anyone done a 05 mazda tributes. ANy help would be appreciated.

Replies:

Posted By: techie51
Date Posted: January 30, 2005 at 11:07 PM

Could someone post the whole diagram for an 05 thanks

Posted By: KarTuneMan
Date Posted: January 31, 2005 at 12:02 AM

https://www.directechs.com/directwire/wire_body.asp?action=select&yr=5764&product=Remote%20Start

Have fun........These things suck...theres NO ROOM.

Get the constant power in the drivers kick, big black wire, the one at the ign harness isn't strong enough, its only

10 amps

-------------

Posted By: techie51
Date Posted: January 31, 2005 at 2:29 PM

I installed the alarm but it seems like the remote is not talking to the brain. I have double checked the wiring and still no output. The alarm is a 2wssr and it is brand new. Is there a way of testing it?

Posted By: mxxmikexx
Date Posted: January 31, 2005 at 2:55 PM

kartuneman...
these suck?

these have to be one of the easiest new vehicles to work on.

-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106

Posted By: Velocity Motors
Date Posted: January 31, 2005 at 7:37 PM

techie51 wrote:

I installed the alarm but it seems like the remote is not talking to the brain. I have double checked the wiring and still no output. The alarm is a 2wssr and it is brand new. Is there a way of testing it?

One other thing to check ( I forgot about this ) is to make sure that you have the correct antenna. It has to say 2W on it somewhere. I had one a while back that did the same thing and it ended up that I had a 1W FM antenna and it wasn't comunicating at all.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: techie51
Date Posted: January 31, 2005 at 10:14 PM

The antenna is SS-2W-911