'93 Cadillac Keyless Entry and Starter
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49010
Printed Date: September 20, 2024 at 8:05 PM
Topic: '93 Cadillac Keyless Entry and Starter
Posted By: fatgotti
Subject: '93 Cadillac Keyless Entry and Starter
Date Posted: January 31, 2005 at 8:10 AM
I have a '93 Cadillac Sedan Deville I am installing and Omega Mars 22 keyless entry and car stater and I am not experienced with alarms or starters but this system has - lock and unlock outputs on it and my car has a positive pulse system if I am not mistaking how do I wire the locks and what other obstacles will I have?
-------------
Fatgotti Yeah my name is John and I am FAT!! YEAH BABY
Replies:
Posted By: jaurora
Date Posted: January 31, 2005 at 8:53 AM
Usally, the outputs on the module can be set for negitive(-) pulse and/or Positive pulse (+) Be sure that the outpust see a Positive (+) pulse and connect the lock wire from the module directly into the lock wire and do the same with the unlock wire. No relays will be required to do this operation,
-------------
MECP certified (If it really means anything)
Jeremy
Posted By: Chimp
Date Posted: January 31, 2005 at 10:34 AM
If you can't set you alarm to + pulse out put you can always use the -ve puulse output and send it to a relay to switch a +ve supply.
Posted By: KarTuneMan
Date Posted: January 31, 2005 at 11:54 AM
Look on this site, for diagram how to wire a relay for poss. using a negative trigger https://www.directechs.com/directwire/wire_body.asp?action=select&yr=2086&product=Remote%20Start -------------
Posted By: fatgotti
Date Posted: January 31, 2005 at 1:06 PM
I have a diagram that shows how to wire a relay but it shows a coil between 85 going to 86 and a straight bar from 87a to 30 and I dont know exactly how it is supposed to be wired do I need special coils or what? I know most of this is pretty dumb but I definitley want to learn how to do this...
-------------
Fatgotti Yeah my name is John and I am FAT!! YEAH BABY
Posted By: fatgotti
Date Posted: January 31, 2005 at 8:34 PM
Please anyone help me!!!!
-------------
Fatgotti Yeah my name is John and I am FAT!! YEAH BABY
Posted By: Velocity Motors
Date Posted: January 31, 2005 at 9:14 PM
The straight bar is only showing you that the arm is connecteding pin 30 and 87a together when the relay is off. When energized, the relay will flip that arm to 87 and connect 87 & 30 together momentarily. Use this diagram to help you convert the (-) to a (+) polarity: https://www.velocitymotorsport.com/images/install_notes/N2P.jpg------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: fatgotti
Date Posted: February 01, 2005 at 7:00 AM
Thank you guys. Velocity Motors that diagram was way more simple then the one that comes in the manual Thanks a million...
-------------
Fatgotti Yeah my name is John and I am FAT!! YEAH BABY
Posted By: Velocity Motors
Date Posted: February 01, 2005 at 9:42 AM
No problemo
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|