791xv in an Envoy
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49066
Printed Date: June 09, 2024 at 11:03 AM
Topic: 791xv in an Envoy
Posted By: xxmattfxx
Subject: 791xv in an Envoy
Date Posted: January 31, 2005 at 8:06 PM
I plan to install the Viper 791xv in an envoy next weekend, along with a PLDATA-III from crimestopper, and the 455g from dei. I've read through the forum but haven't seen much in regards to adding an aftermarket alarm, to replace the existing factory alarm. I am pretty sure it is an SLT so I should be able to disable it. Does anyone have any more detail in regards to which wires on the 455g I should use, and which I should wire traditionally...e.i. the door triggers, domelight...etc. Thanks
Replies:
Posted By: italnpimp59
Date Posted: January 31, 2005 at 10:19 PM
what year envoy?
-------------
Posted By: xxmattfxx
Date Posted: February 01, 2005 at 3:56 PM
sorry, I believe it's a 2002
Posted By: kgerry
Date Posted: February 01, 2005 at 5:11 PM
455G should do everything for you.... just hook it up like the instructions say and off you go.... it will do locks, arm/disarm and dome....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: xxmattfxx
Date Posted: February 02, 2005 at 9:47 AM
ok, I am skepticle because I seem to remember reading in other posts that wiring the trigger to the 455g created an interference and the arm would not work correctly because the dome light would still be on, or something of that sort.
Posted By: kgerry
Date Posted: February 02, 2005 at 10:41 AM
the 455 holds back the domelight for 10 seconds from the alarm... allowing it to shut off before making a connection to the alarm circuit... it works fine most of the time.....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: xxmattfxx
Date Posted: February 02, 2005 at 11:19 AM
some other things, does the 455g take into account the hood and trunk triggers individually...so that they show up correctly on the 791xv lcd remote? I see some listings for a factory hoodpin switch in the wiring charts, is this on all models or just certain envoy's?
Posted By: kgerry
Date Posted: February 02, 2005 at 12:59 PM
hood and trunk have nothing to do with the 455
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
|