compustar artic start programing

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49071
Printed Date: July 19, 2025 at 3:38 PM

Topic: compustar artic start programing

Posted By: repmud
Subject: compustar artic start programing
Date Posted: January 31, 2005 at 8:21 PM

It's a 1WAM-s. I am getting tired of hearing the horn honk all the time, thinking of disconecting the horn wire. Is there anyway to program the thing to beep only when I lock the door? I do not want to hear the thing everytime I unlock the doors and trunk, as well as activate the remote start.
I was thinking of wiring the horn so it powers off of the door lock pulse/relay, after I disconect the wire from the brain to the horn, if I can not program the unit to do what I want. Can I do this? the car is an 02 Cavalier

Replies:

Posted By: Velocity Motors
Date Posted: January 31, 2005 at 9:02 PM

Cut the wire off the HORN output of the 1WAMS and attach the side that is attached to the horn to pin 30 of a SPDT relay. 87 will go to ground and 86 you will need to split a wire off the BLUE/BLACK wire of the 1WAMS ( one to lock output and the other to this pin ) and then 85 will go to 12 volts constant. 87a will not be used.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: repmud
Date Posted: February 01, 2005 at 9:48 AM

Thanks for the input, the horn function is driving me nuts.

Posted By: Velocity Motors
Date Posted: February 01, 2005 at 9:50 AM

No problemo posted_image

I never use the horn function on any of these units. Customer's never even ask for horn confirmation around here, the lights are a good enough indication for lock/unlocking.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA