Print Page | Close Window

Clifford matrix negative arm output

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49097
Printed Date: November 09, 2025 at 2:52 AM


Topic: Clifford matrix negative arm output

Posted By: aduk
Subject: Clifford matrix negative arm output
Date Posted: February 01, 2005 at 5:08 AM

I've got a clifford matrix one and have just bought a clifford flashing window sticker, it needs to be wired to the negative arm output but when i do this the central locking keeps trying to unlock only when the alarm is unarmed, is there a way to stop this. Cheers



Replies:

Posted By: dare_ds69
Date Posted: February 01, 2005 at 6:35 AM
used a relay or diode

-------------
how own your mind, control your life.
MECP certified. always use a DMM



Posted By: aduk
Date Posted: February 01, 2005 at 8:01 AM
the stickher said to connect it to the orange, negative when armed wire, so i haven't used a relay or diode, is this my problem, sorry i'm new to this!!!



Posted By: kgerry
Date Posted: February 02, 2005 at 3:17 PM
you must have something hooked up wrong, the GWA circuit has nothing to do with the lock circuit....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979



Posted By: aduk
Date Posted: February 02, 2005 at 4:21 PM
i've inserted a diode between the GWA circuit and the wire that connects to the sticker and all seems to be working.




Print Page | Close Window