I insatlled a pestige aps55-LRA keyless/remote starter. Everthing seems to work fine but the customer told me that sometimes when he unlocks the door via remote that the factory alarm sounds. I dont understand on how this could happen when the factory alarm is controlled by the doorlocks. The only think I could thing of is where I have made my connections. I used the wires coming out of the smart entrance controll unit. From the tech sheet that I got it said to use LT GREEN/ red for lock and brown for unlock. I metered these wires and used them and everything worked fine, but however I found a posted DEI techsheet which stated to use yellow for unlock and yellow/red for lock. Is it possible that I used the wrong wires which are tripping the alarm?
-------------
MECP certified (If it really means anything)
Jeremy
I thought it requires Double Pulse.
Also check Arm / Disarm wires with Door Key Switch
| Power Lock | LIGHT GREEN/ RED | AT SMART ENTRANCE |
| Power Unlock | BROWN | CONTROL UNIT * |
Negative Pulse Door Lock s
* SMART ENTRANCE CONTROL UNIT Is Located High In The Driver's Kick Panel.
| OEM Alarm Arm | YELLOW (-) | AT SMART ENTRANCE |
| OEM Alarm Disarm | YELLOW/RED (-) | CONTROL UNIT * |
Reversal Rest At Ground Power Window Circuit
* Smart Entrance Control Unit Is Located High In The Driver's Kick Panel. ** W/ OEM Alarm LT GREEN/ RED (-) At Relay Or SECU.
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.