Print Page | Close Window

Valiant RS201 Remote Starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49126
Printed Date: May 21, 2024 at 7:26 PM


Topic: Valiant RS201 Remote Starter

Posted By: rbelli
Subject: Valiant RS201 Remote Starter
Date Posted: February 01, 2005 at 3:27 PM

I have 1990 camry that I want to install a Valiant rs201 remote starter. I do not have the wiring diagram. On the back of the unit are the wire locations, but some I do not know where or if to use them.
The ones with the asterisk in front are the ones I need help with. There is no alarm on the vehicle.
This is what it says:

BLACK:   SYSTEM GROUND

*BROWN: SENSOR BYPASS TO SENSOR TRIGGER WIRE

*BLUE: SENSOR BYPASS TO ALARM SENSOR TRIGGER WIRE

*GRAY: GROUND OUT WHEN REMOTE STARTER ACTIVE

WHITE: BRAKE INPUT POSITIVE

BLUE/WHITE: HOOD PIN SWITCH NEGATIVE

*ORANGE: RECEIVER INPUT NEGATIVE

*GREEN: VACUUM INPUT NRGATIVE (N.C. VACUUM LOOP MUST BE CUT )

YELLOW: +12V OUT TO PARKING LIGHT



PURPLE: +12V OUT TO STARTER

ORANGE: +12V OUT TO ACC.

YELLOW: +12V OUT TO IGNITION

RED: MAIN POWER INPUT +12V

Any help would be appreciated.
Thanks Rich

p.s. the valiant RS201 is made by IC Dynamics.






Print Page | Close Window