1995 Mercedes E-320, 710T
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49145
Printed Date: May 15, 2025 at 11:25 AM
Topic: 1995 Mercedes E-320, 710T
Posted By: OffroaderF150
Subject: 1995 Mercedes E-320, 710T
Date Posted: February 01, 2005 at 9:00 PM
I have a 95 Mercedes E-320 2 door coupe that has a "your valet" 710T keyless entry in. the owner asked my to program 2 more remotes to the unit which i did, but the original installer did not hook up the ignition wire, probably because of the ign controlled door locks would set off the factory alarm. anyways i pulsed 12+ through the ign (yellow) wire of the alarm to enter the programming sequence, and they programmed fine. however, now the door locks do not work. i reprogrammed it to 3.5 sec door lock pulses and it still doesnt seem to work.. no wiring was changed and i even tried rewiring the door lock relays to see if that would fix it but they still do not work. any ideas? the alarm still works but it wont lock and unlock the doors anymore. the relay was wired to the vacuum pump under the pass. rear seat.
Replies:
Posted By: slammedb5
Date Posted: February 02, 2005 at 2:43 AM
Did you trry double pulse?
-------------
EK Civic
security
no audio
Posted By: OffroaderF150
Date Posted: February 02, 2005 at 12:11 PM
yea i did....still nothing
|