2002 Envoy PLDATA-III?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49191
Printed Date: May 17, 2024 at 9:20 PM

Topic: 2002 Envoy PLDATA-III?

Posted By: xxmattfxx
Subject: 2002 Envoy PLDATA-III?
Date Posted: February 02, 2005 at 10:06 AM

I've never installed an alarm/remote start in an envoy, I instructed my customer to get the PLDATA-II but he returned with the PLDATA-III from crimestopper. Has anyone ever used this module? I was expecting to only have to splice into the purple ODB-II wire but this looks like it has to be spliced into a yellow wire near the ignition, and then turn a small screw until an led on the unit turns off. Will this work or should I try and get the PLDATA-II or a DEI Passlock 2 bypass...thanks.

Replies:

Posted By: xxmattfxx
Date Posted: February 14, 2005 at 5:57 PM

anyone?

Posted By: NowYaKnow
Date Posted: February 14, 2005 at 8:45 PM

Should work basically your manually tuning the passlock resistance value. Just hook into the yellow passlock wire at the steering column and turn the pot until the led comes on or off whatever it's supposed to do and that should mean you have it set correctly.

Mike

Print Page | Close Window