Programming a Clifford Alarm remote how?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49212
Printed Date: June 03, 2024 at 9:10 AM

Topic: Programming a Clifford Alarm remote how?

Posted By: blg748
Subject: Programming a Clifford Alarm remote how?
Date Posted: February 02, 2005 at 3:06 PM

Ok the vehicle is a 1993 MAZDA MPV. It has the CLIFFORD ALARM AND STARTER system installed. When we bought the van it came with only one remote. I purchased 2 remotes identical to the one which came with the car off ebay, even with the same FCC id OF FCC ID:# CZ57RRTX12R . Now i have NO CLUE on how to porgram these 2 new extra remotes. Can anyone help me here?

Some info ON the alaram: (Works with all these systems)
Advantage Plus
AvantGuard, AvantGuard 2, AvantGuard 3
Cocept 10, Concept 30, Concept 50
IntelliGuard 600, 600 (Ver 2)
IntelliGuard 700, 800, 900
IntelliVoice
Remote Commander
Sabre,
SE 4000, SE 5000
Smart Remote Starter III
SuperNova
Vesco600A

Replies:

Posted By: kgerry
Date Posted: February 02, 2005 at 3:12 PM

what is the exact model # of the unit in the MPV?

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: blg748
Date Posted: February 02, 2005 at 4:44 PM

i dont have it exactly with me right now soon as i get home ill find out. So with the model # would you be able to tell me exactly how to program this remote ? it woudl be greatly appreciated.

Posted By: DAVE WALKER
Date Posted: February 04, 2005 at 7:01 AM

What do the remotes look like, how many buttons, and what does the valet switch look like?