Need a CS320i installation Guide
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49298
Printed Date: July 03, 2025 at 3:46 AM
Topic: Need a CS320i installation Guide
Posted By: Honda99
Subject: Need a CS320i installation Guide
Date Posted: February 03, 2005 at 7:47 PM
I have a cs320i command start. i took out from my 1987 toyota 4runner. now i want to install on toyota camry 1991. anyone have a installation guide please send it to me. thanks
Replies:
Posted By: Velocity Motors
Date Posted: February 03, 2005 at 8:00 PM
Here is the wiring diagram for this model: https://www.the12volt.com/downloads/file.asp?ID=301------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Honda99
Date Posted: February 03, 2005 at 8:49 PM
Hi Jeff..
Is this cs320i model can be use for power door lock for my toyota camry. which my camry is negative(-) door lock but i wonder the blue(aux 2) and orange (aux1) is work for both neg/pos.
how do you wiring a starter disable output(violet)?
Thanks
Posted By: Velocity Motors
Date Posted: February 03, 2005 at 9:08 PM
Use the ORANGE lock (-) to the light green wire at the kick panel and the BLUE unlock (-) wire to the GREEN/ red wire at the kick panel. For the starter disable use this diagram: https://www.velocitymotorsport.com/images/install_notes/010.jpg------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Honda99
Date Posted: February 06, 2005 at 12:57 AM
Hi jeff
i could not find a light green and GREEN/ red wire for door lock. even the violet for park lights. do you know where they are and location. thanks
Posted By: iskidoo
Date Posted: February 06, 2005 at 12:46 PM
Honda99 wrote:
do you know where they are and location. thanks
Velocity Motors wrote:
Use the ORANGE lock (-) to the light green wire at the kick panel and the BLUE unlock (-) wire to the GREEN/ red wire at the kick panel.
Door Lock Light Green (-) Driver's Kick Panel
Door Unlock GREEN/ Red (-) Driver's Kick Panel
Posted By: iskidoo
Date Posted: February 06, 2005 at 12:49 PM
Parking Lights Dark Green @Fuse Panel
Posted By: Honda99
Date Posted: February 07, 2005 at 12:15 AM
First of all. i would like say thanks to WHOM have been help me out for this project.
I finally get it work but except the Door Unlock intead GREEN/ Red i got solid Green. I measure the voltage when a door lock is 12V and then Unlock for 1 second it go down to 9v and go back to 12V. but the Lock from 12v and for a second when i unlock go down to 0v and go back to 12v...so i don't know what a diff
But it work.....any comman please tell me.
One a again Thanks
|