Print Page | Close Window

1995 F150 ground out when running

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49311
Printed Date: May 12, 2024 at 4:27 AM


Topic: 1995 F150 ground out when running

Posted By: Fosgate3
Subject: 1995 F150 ground out when running
Date Posted: February 03, 2005 at 11:27 PM

doing a remote start system on my truck... alarm is calling for a connection on a "ground out when running" on the vehicle...

whats a good wire to use or way to work this in?




Replies:

Posted By: Velocity Motors
Date Posted: February 03, 2005 at 11:55 PM
This wire is found on the remote start unit. It's a wire that goes to (-) ground when remote start is activated and rests at nothing. It may also be called a status output wire.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: Fosgate3
Date Posted: February 04, 2005 at 12:31 AM

Thanks Jeff... I actually re-read the wiring diagram more closely and discovered that this is a neg when running OUTPUT .. ah hah! so... the alarm is in and works great...

btw, it was a Harada HCS-900 that I was installing on my truck. I love the alarm. I put one on my wife's 2000 mustang and then reinstalled it on her 04 impala. it works great and never had a problem with it.

Thanks again!


Print Page | Close Window