I have a 2000 honda civic ex 4 door sedan and I would like to get all the help i can installing this item. I'm very familiar with car stereo products but I have never installed a car starter especially a car starter for a manual transmission vehicle. Any and All help I can get would be excellent.
do not put a remote start on that car... un safe.....
-------------
audio installer /alarms/moblie video how can i help?????????
Why is it unsafe? I did one a couple weeks ago with absolutely no problems. Please fill me in.
This unit is made for manual tranny vehicles, you will need to go through a sequence in order for the RS to operate everytime you exit the vehicle. Here is a wiring diagram for the car:
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|white |+ |ignition harness |
| STARTER|BLACK/ white |+ |ignition harness or *1 |
| IGNITION|BLACK / YELLOW |+ |ignition harness |
| SECOND IGNITION|yellow |+ |ignition harness |
| ACCESSORY|WHITE/ black |+ |ignition harness |
| POWER LOCK|GREEN / WHITE |- |keyless entry module *2 |
| POWER UNLOCK|GREEN/ orange |- |keyless entry module *2 |
| LOCK MOTOR|WHITE/ red | |drivers kick panel |
| UNLOCK MOTOR|blue/red | |drivers kick panel |
| DISARM DEFEAT|yellow/red | |keyless entry module *2 |
| PARKING LIGHTS +|RED / black | |keyless entry module *2 |
| HEADLIGHTS| | | |
| DOOR TRIGGER|lt. GREEN/ red |- |OEM alarm plug *3 |
| DOME SUPERVISION|same as doors | | |
| TRUNK/HATCH PIN|blue/black |- |OEM alarm plug *3 |
| TACHOMETER|blue | |test connector *4 |
| SPEED SENSE| | | |
| BRAKE WIRE|GREEN / WHITE |+ |brake switch |
| HORN TRIGGER|gray |- |OEM alarm plug *3 |
| WIPERS| | | |
| LF WINDOW UP/DN|RED / yel - RED / blu |A |drivers door switch |
| RF WINDOW UP/DN|blu/yel - blu/org |A |drivers kick panel |
| LR WINDOW UP/DN|grn/yel - green |A |drivers kick panel |
| RR WINDOW UP/DN|yellow - yel/grn |A |drivers kick panel |
Notes:
*1 In 6 pin white plug behind fuse box *2 The keyless entry module is white in color, and located in the drivers kick panel. *3 The OEM alarm plug is to the right side of the steering column. The plug is green. *4 Drivers side fire wall under hood in a 2 pin plug
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
in the installation guide it says that every thing gets connected but the re-arm, trunk release, factory disarm, (-) when running/armed, and (-) horn honk. The quick start install steps say to connect everything else except those. Why is that? Also There are 2 12power input wires and I only have 1 constant 12V+ do I wire both to that single wire? Do I use Ignition2 for the selectable output "jumper" The Ignition2 wire and the accessory wires are both yellow are those 2 supposed to be wired together. Do I need any relays?