Clifford Intelliguard 6000 and a proximit

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49357
Printed Date: May 13, 2025 at 5:11 AM

Topic: Clifford Intelliguard 6000 and a proximit

Posted By: gmanrocks
Subject: Clifford Intelliguard 6000 and a proximit
Date Posted: February 04, 2005 at 5:55 PM

I just bought, a 1986 Toyota 4Runner – it has a top that comes off. It came with a Clifford Intelliguard 6000. I am thinking about installing a proximity sensor onto it. I found an owners manual for the Clifford Intelliguard 600 (no wiring diagram) and it mentions that a Clifford Dual Zone Proximity Sensor 4 can be used with this unit. Well, I can’t find one for sale.

So, can I use any proximity sensor and if so how do I wire it? If someone has a wiring diagram for the Clifford Intelliguard 6000 and the Dual Zone Proximity Sensor 4 – then I might be able to match up another proximity ( radar ) sensor to it and figure out the wiring.

I see cheap ones on ebay - anyone recommend any? I see bulldog has one?

Thanks for your help.

Replies:

Posted By: gmanrocks
Date Posted: February 07, 2005 at 10:18 AM

Anyone?

Posted By: Jolene?
Date Posted: February 07, 2005 at 1:48 PM

does anyone know where i can find a wiring chart for the clifford system...im looking for a friend of mine, it's the one that shocks you if you touch the car...

Posted By: Jolene?
Date Posted: February 07, 2005 at 1:49 PM

does anyone know where i can get a wiring chart for the clifford system?

Posted By: Velocity Motors
Date Posted: February 07, 2005 at 2:24 PM

33		Clifford Intelligaurd 6000 (uploaded by Velocity Motors on 2/7/2005)		269 KB
		Installation Manual ...(intelliguard6000_install.pdf)

Here you go.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: deocder
Date Posted: February 07, 2005 at 4:13 PM

Look for any sensor by DEI, that will interface with the Clifford.

Posted By: gmanrocks
Date Posted: February 07, 2005 at 5:04 PM

Velocity Motors (Jeff) - Thanks - I can totally see where it connects with which wires. I just had a pdf of the Owner's manual (no wiring diagram in that). Thanks.

deocder - perfect - exactly the info I needed! Thanks.