Print Page | Close Window

Hornet 553t, 2002 Honda Civic

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4940
Printed Date: May 19, 2024 at 6:14 PM


Topic: Hornet 553t, 2002 Honda Civic

Posted By: superman121880
Subject: Hornet 553t, 2002 Honda Civic
Date Posted: October 29, 2002 at 8:19 PM

I installed a hornet 553t on my new 2002 civic and all the lights and door locks work fine with the alarm . All the Zones are working fine except the shock sensor... It lights up when i tap on the car .. but it does not set off the alarm.. also the alarm activates when the car is on and running.....i took the car for a spin and now the Check engine light came on... When the alarm  goes off the ignition kill works fine...i dont know what my problem is... i hooked up the yellow wire from the  alarm harness straight to the ignition.. i tried programing it but th vallet switch is not working... can any one help me out please.....ASAP.... Thank you..

-------------
superman



Replies:

Posted By: mikec
Date Posted: October 29, 2002 at 8:28 PM
try this reset the alarm by unpluging... it if the yellow wire is hook up to the starter kill relay then to ignition make sure you have the right ignition wire... test with volt meter.....you may need to reset the car's bcm disconnect the cars (+) side battery wire for a few minutes...

-------------
audio installer /alarms/moblie video how can i help?????????




Posted By: securinu
Date Posted: October 29, 2002 at 8:30 PM
sounds like you didnt get a true ignition . check and advise . check engine light means most likely that a wire is not powered up by the remote start . try to start with the key and see if the light stays on if not then you need to power up another ignition wire.




Posted By: superman121880
Date Posted: October 29, 2002 at 8:39 PM

I got  the correct wire for the ignition... i checked it with the volt meter and the test light to see if it would stay on... The only thing i did not do is hook up the yellow wire to the starter kill rellay on 86.. instead i hooked it up str8 to the ignition wire under the steering councel....im going to try reseting the alarm by the positive pole of the battery..if that does work i will try the the 86 on the starter kill rellay..  thanks guys... be back in 10 minutes... if there any other suggestion that can hel me out i would appreciate it alot ... Thanks



-------------
superman




Posted By: superman121880
Date Posted: October 29, 2002 at 8:58 PM

Nothing happens ... same problem ... the alarm still activates when the car is on .... checked everything and still ... any other suggestion guy's???..... I know there's a GOD out there.... please help me!!!



-------------
superman




Posted By: Velocity Motors
Date Posted: October 29, 2002 at 9:56 PM

Did you use the BLACK /YELOOW wire as your primary ignition ?



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: superman121880
Date Posted: October 29, 2002 at 9:59 PM

Jeff ,

N0 i used the yellow wire as my primary ignition.



-------------
superman




Posted By: superman121880
Date Posted: October 29, 2002 at 10:55 PM

JEFF ANY MORE SUGESTIONS????   PLEASE ANYONE????



-------------
superman




Posted By: superman121880
Date Posted: October 30, 2002 at 10:57 AM
I fixed my problem, the brain of the alarm was defective... Thanks to everyone for your support...

-------------
superman





Print Page | Close Window