Tach wire on 98 galant
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4941
Printed Date: August 18, 2025 at 10:11 PM
Topic: Tach wire on 98 galant
Posted By: avitalsuxs
Subject: Tach wire on 98 galant
Date Posted: October 29, 2002 at 8:21 PM
I have avistart 6000 will not except tach wire on distributer. It needs to be between 1-5 volts, tach is less than 1 volt. No tachless mode on alarm. Is there anyware else that I can find a wire for rpm's that will work?
Replies:
Posted By: securinu
Date Posted: October 29, 2002 at 8:26 PM
go to any odd color injector wire. this should work just fine
Posted By: PLAYER69
Date Posted: October 29, 2002 at 8:31 PM
Are you using the white wire at the coil?
Posted By: avitalsuxs
Date Posted: October 29, 2002 at 8:34 PM
yes
-------------
asfdn
Posted By: avitalsuxs
Date Posted: October 29, 2002 at 8:37 PM
Ill tell you what it is doing. It will start car, the starter doesnt shut off for a few seconds, When it does engine will shut off and then it tries 2 more times
-------------
asfdn
Posted By: avitalsuxs
Date Posted: October 29, 2002 at 8:40 PM
it starts but the starter doesnt shut off for a few seconds when it does the engine shuts off ------------- asfdn
Posted By: PLAYER69
Date Posted: October 29, 2002 at 9:00 PM
Not good. It definately sounds like you are not getting a tach signal. You can try and find an injector wire like securinu suggested or get a different remote start.
Posted By: jiggabo4u
Date Posted: October 29, 2002 at 9:03 PM
maybe you shouldn't of bought a pos galant!!!
Posted By: Velocity Motors
Date Posted: October 29, 2002 at 9:54 PM
Did you verify the correct tach signal and also double check the tach programming sequence of the RS unit ? How did you get a reading of 1 volts on the DMM ? Please explain it so it will help us better understand what you did so we're not chasing our own tails .
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: SOUND PRESSURE
Date Posted: November 01, 2002 at 2:10 AM
Did you set your DMM to AC?
-------------
Sound Pressure
You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!
Posted By: Velocity Motors
Date Posted: November 01, 2002 at 4:33 PM
That's what I'm thinking..... but if he set it to DC he would have gotten about 12 volts. I don't think he grabbed the right wire.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|