Compustar 2WSSR-AS Help
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49466
Printed Date: May 10, 2024 at 11:33 AM
Topic: Compustar 2WSSR-AS Help
Posted By: vxtecz
Subject: Compustar 2WSSR-AS Help
Date Posted: February 06, 2005 at 3:50 AM
Hi, I finish installing and program the alarm system for my 1993 Honda prelude... when arm everything works.. but when i try to remote start me car it wont start.. and I did the reservation mode since i have a manual transmission... i notice when activating the reservation mode.. i turn the key off the car turn off... what is the problem? did i wire it wrong? i bypass the clutch with the status, starter, ign, and acc output to the purple pigtail and clutch wire to the blue wire from the relay that compustar provided. BTW the jumper wire is not cut and every thing on the jumper switch 1 & 2 is on "on" setting. Please help me thank you
Replies:
Posted By: SEXIFIED
Date Posted: February 06, 2005 at 5:38 PM
cut the loop
-------------
SWEET.
Posted By: vxtecz
Date Posted: February 06, 2005 at 7:32 PM
dont want to void my warranty. thanks for helping tho
Posted By: metaverse
Date Posted: February 06, 2005 at 7:50 PM
Unless you are a dealer, there is no warranty for you..
Cut wire should be for auto tranny only..You should not have to cut the wire.. If reservation works, and assuming you have tach programmed and alternator sensing turned off..you should be good to go.. There are some compustar experts here whould would probably chime in..
Posted By: vxtecz
Date Posted: February 06, 2005 at 9:58 PM
Can any compustar expert please help me? thx
Posted By: f00dstamps
Date Posted: February 06, 2005 at 10:35 PM
did you wire the parking brake and the foot brake?
Posted By: vxtecz
Date Posted: February 06, 2005 at 10:46 PM
yup all wired up when i pull up my ebrake my door unlock.. is that normal?
Posted By: f00dstamps
Date Posted: February 06, 2005 at 10:52 PM
that means your ignition-controlled doorlocks option is turned on.
i just installed my first compustar yesterday and i programmed it today for my friend. the ignition-controlled doorlocks (which lock when the e-brake is put down, and unlocks when the ebrake is pulled up) was an option on the model i installed but it was not the default option.
are you doing the shutdown sequence correctly?
ebrake, foot off brake, take key out.
Posted By: vxtecz
Date Posted: February 06, 2005 at 11:44 PM
Yup... but im think i might wire the foot brake it the wrong harness instead of wire it straight to the foot brake.. im gonna fix that and see if that fix the problem. thanks for helping and will give a up date if that is the problem or not.
Posted By: f00dstamps
Date Posted: February 06, 2005 at 11:47 PM
my opinion is compustar is a more complicated install than a DEI install. i'm glad my first experience was with DEI because it prepared me for the compustar install.
good luck with your problem and we'll look foward to the updates.
Posted By: Velocity Motors
Date Posted: February 07, 2005 at 12:35 AM
vxtecz wrote:
i bypass the clutch with the status, starter, ign, and acc output to the purple pigtail and clutch wire to the blue wire from the relay that compustar provided.
Please explain what you did with the BLUE wire from the main harness ? This wire is suppose to be for a 2nd IGN or ACC or starter wire, not for the clutch. As far as reservation mode goes, you have to come to a stop in the car ( press the brake pedal ), pull up the hand brake, & then release the foot brake. The lights will flash and remove the key from the ignition switch. Make sure that you do not remove the key until your lights turn on or you hear a relay click from the CPU of the Compustar. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: vxtecz
Date Posted: February 07, 2005 at 4:15 AM
Yup that was the problem the foot brake wire was connected to the correct wire... but now when i remote start it... it wont crank.. i can here it try to start but wont crank.
Posted By: Velocity Motors
Date Posted: February 07, 2005 at 4:22 AM
Did you use the starter disable relay that the system came with ? Make sure that you wired the proper side of the relay to the starter motor and the key side.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: vxtecz
Date Posted: February 07, 2005 at 4:25 AM
i hook up the blue wire to the clutch wire and it blew up my clutch switch... im stuck on what i was suppose to do with the clutch wire?
Posted By: vxtecz
Date Posted: February 07, 2005 at 4:26 AM
soild yellow to the motor side and yellow/black to the key side rite?
Posted By: vxtecz
Date Posted: February 07, 2005 at 4:32 AM
what wire do i suppose to connect the status output (black wire) and starter output (RED / black) my clutch wire is (GREEN/ black)... thanks for helping
Posted By: Velocity Motors
Date Posted: February 07, 2005 at 4:38 AM
Did you test the clutch wire to see if it's a (-) or a (+) trigger ? Some Honda's use a (-) and some use the (+). Tst with a DMM. If you want to try this, get inside the car and get into ready mode, now stay in the vehicle and press the clutch in. Try to remote start the vehicle and if it works with the clutch pressed in, then you know that everything works except the clutch bypass. If it doesn't work, then you have other issues with the system.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: vxtecz
Date Posted: February 08, 2005 at 3:42 AM
The remote start when i push the clutch... but wont start when clutch not down... so its not starting because my clutch show not sign of bypassed.. hmm do i bypass with the status output wire to the clutch wire or the starter output to the clutch wire?
Posted By: Velocity Motors
Date Posted: February 08, 2005 at 5:43 AM
First you have to find out what system you have for clutch : https://www.velocitymotorsport.com/images/install_notes/107.jpg https://www.velocitymotorsport.com/images/install_notes/146.jpg ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: vxtecz
Date Posted: February 08, 2005 at 10:01 AM
thanks for helping me
Posted By: Velocity Motors
Date Posted: February 08, 2005 at 1:07 PM
No problemo
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|