factory arm wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49473
Printed Date: June 07, 2025 at 8:41 AM

Topic: factory arm wire

Posted By: melfen
Subject: factory arm wire
Date Posted: February 06, 2005 at 9:53 AM

can someone help me find the factory alarm arm wire on a 2002 pontiac grand prix, diagram i have say's RED / black wire in drivers kick panel harnnes but on wire of that discription can be found.

Replies:

Posted By: KarTuneMan
Date Posted: February 06, 2005 at 4:45 PM

dis arm should be ORANGE / black on the keyless modulehigh under dash drivers side

-------------

Posted By: sparkie
Date Posted: February 11, 2005 at 1:51 PM

To arm the factory alarm you must pulse the driver's doorpin wire (tan) to ground and lock the doors at the same time. You must also reprogram the factory alarm to allow it to arm this way. The default setting from the factory is to only arm with the factory remote transmitter. Check your owner's manual for directions or your dealer. You need two keys and the factory remote to do it.

-------------
sparky

Print Page | Close Window