door lock unlock question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49498
Printed Date: May 14, 2025 at 4:25 AM

Topic: door lock unlock question

Posted By: muaiad97
Subject: door lock unlock question
Date Posted: February 06, 2005 at 6:15 PM

hi all

guys i have question . it happens to me every time i install r\s or keyless entry i take time or hours to find the wires for door luck unlock my question is . is ther any easy way to find these wire .so i dont have to go under the dash and look for thes wires . can i get thes wire from the fuses panal or frome door swich at the driver door is ther any different between thes and to go under the dash look for wires. just question...........

thanx for any answers

Replies:

Posted By: thepencil
Date Posted: February 06, 2005 at 7:18 PM

This all depends on the type of vehicle, but to know where the lock and unlock wires are at you have to get a good source of wiring info. diagram. 12 volt has one of these.

or you can to pay for something like this.

wiring info.

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: xtreme069
Date Posted: February 07, 2005 at 5:12 AM

when you lock and unlock the doors with the master lock or switch you more often than not can hear a relay click when you round about find where this click is coming from put your hand on the relays in the area so you can feel the relay click then probe tghe wires in that relay, if there is a master switch then you can sometimes find the wires behind the switch and if the switch is in the door, probe the wires in the kick panel that come through the door jam also some people will find the locking relays in the bcm by probing the circuit board not really recomended but can cut down time good luck and may the force be with you !!! hope this helps

-------------
I Love This Industry!!