factory arm/disarm wires?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49510
Printed Date: May 22, 2024 at 8:46 PM
Topic: factory arm/disarm wires?
Posted By: mikk
Subject: factory arm/disarm wires?
Date Posted: February 06, 2005 at 8:02 PM
could the factory arm(lock) / factory disarm(unlock) wires be used to trigger my door locks? b/c the door locks/unlock wires arent currently working on my ultra start 4255 for some reason. seems the wires(factory) should be able to trigger the relays/locks, right? ------------- mikk
Replies:
Posted By: mo12v
Date Posted: February 06, 2005 at 8:16 PM
Year & Make of Vehicle?????
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: Uniqueauto
Date Posted: February 06, 2005 at 8:17 PM
Need Car info?
Posted By: jrilla
Date Posted: February 06, 2005 at 8:20 PM
No you wouldn't want that. There are seperate door lock outputs on that unit that you would use to control the locks. Depending on what vehicle and type of locks, you may need relays. There are only negative lock outputs on that unit.
-------------
J Rilla
Owner/Installer
Posted By: mikk
Date Posted: February 06, 2005 at 8:29 PM
' 94 pontiac bonneville. vehicle has postive door locks and since the door lock wires arent working what other choice(s) do i have? yes, relays will be required.
-------------
mikk
Posted By: jrilla
Date Posted: February 06, 2005 at 8:40 PM
If the lock outputs don't work, then you need a new unit if you want the locks to work. If that is the problem.
-------------
J Rilla
Owner/Installer
Posted By: swamprat323
Date Posted: February 06, 2005 at 8:42 PM
Did you put fuses on the relays if so are they good. Also how did you hook the relays.
Posted By: mikk
Date Posted: February 06, 2005 at 10:14 PM
lock outputs do not work. so i was gonna try the factory arm/re-arm wires. there is an inline fuse to all relays-its fine. hook'd them up according to the diagram for my(+) lock type. just got the unit few days so a replacement is possibly. if not- than i'll try those wires and believe it should work.
-------------
mikk
Posted By: jrilla
Date Posted: February 06, 2005 at 10:16 PM
Your doors will unlock when you press start.
-------------
J Rilla
Owner/Installer
Posted By: mikk
Date Posted: February 07, 2005 at 11:26 PM
yes, you are correct. i found that out when i hit start. getting a replacement unit soon. would you know how to hook up dashmount led to this unit or domelight supervision - dont see any wires for those features.
-------------
mikk
|