Remote Start/Parking Light Question...
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49540
Printed Date: April 29, 2024 at 12:06 AM
Topic: Remote Start/Parking Light Question...
Posted By: Mike_89gts
Subject: Remote Start/Parking Light Question...
Date Posted: February 07, 2005 at 4:52 AM
ok - my remote start has 2 wires that supply output to my parking lights. On one harness it supplies a +12V output and another harness is supplies a negative 500ma output.
Are these 2 wires getting connected to the same parking light wire
in the vehicle? The one that reads 12v w/ lights on?
Thanks in advance!
Mike_89GTS
Replies:
Posted By: Velocity Motors
Date Posted: February 07, 2005 at 6:45 AM
You use only one of the two. Some vehicles have a (-) wire that triggers the relay while other vehicles have a (+) parking light wire . Use which ever one you want or your vehicle requires. I usually look at which one is easier to get to. If it's easier to use the (-) the I tape up the (+) wire off the alarm harness or vise versa.
------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: dare_ds69
Date Posted: February 07, 2005 at 6:46 AM
what kind of alarm , car, year ?
------------- how own your mind, control your life.
MECP certified. always use a DMM
Posted By: Mike_89gts
Date Posted: February 07, 2005 at 7:19 AM
Thanks for the reply guys!...
It's a crappy tire unit and my car's a 1989 Toyota Celica GTS.
Here's the RS unit I have and the wires in question.
I already have the +12v wire attached to the green +12V
parking lights wire - the wire in question is the one on
the 2 pin harness with the horn output wire.
Appreciate it!
Mike_89GTS
BTW, Jeff @ Velocity Motors - Did you ever use those logos I did for
you sometime ago?
Posted By: Velocity Motors
Date Posted: February 07, 2005 at 7:26 AM
Mike, the YELLOW (-) wire you will not need to use if you already used the YELLOW (+) wire from the other harness. The GREEN wire for the 5th relay to power the 2nd IGN wire ( BLACK/ ORANGE ) at the ignition harness. I ended up using a different logo. The member's liked the current one that we have now, but thanks for the efforts and time.
------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Mike_89gts
Date Posted: February 07, 2005 at 7:39 AM
Thanks a bunch Jeff.
Yeah - the 5th relay thing was figured
out awhile ago. I just used an old .jpg
to show what 2 parking light wires I
was talking about. - Thanks though.
And, not a problem about the logo.
I owed you one!
Have a good day folks.
Mike_89GTS
Posted By: Velocity Motors
Date Posted: February 07, 2005 at 1:18 PM
No problemo... anytime.
------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|