Print Page | Close Window

Clifford parallel sensors

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49541
Printed Date: May 14, 2024 at 6:04 PM


Topic: Clifford parallel sensors

Posted By: black_cabbie
Subject: Clifford parallel sensors
Date Posted: February 07, 2005 at 4:54 AM

Hi all,

I have a clifford arrow 3 alarm which has outputs for 2 sensors only. One dual (4 wire warning/trigger) and one single (3 wire trigger only).

I have already installed a dual proximity sensor and I have a glass break sensor on the other output. Can I have a dual piezo sensor to work in parallel with the the dual proximity sensor and a tilt motion sensor to work with the break glass sensor? Somebody told me I could do it using diodes. Is it true?

Thanks in advance guys! ;)




Replies:

Posted By: auex
Date Posted: February 07, 2005 at 8:57 AM
You can add as many sensors to the instant trigger wire as you want, and if there are any car triggers(hood/trunk) then you should use diodes on all triggers.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.




Posted By: black_cabbie
Date Posted: February 07, 2005 at 10:18 AM

auex]Y wrote:

u can add as many sensors to the instant trigger wire as you want, and if there are any car triggers(hood/trunk) then you should use diodes on all triggers.

Thanks for the reply! posted_image





Posted By: Jolene?
Date Posted: February 07, 2005 at 1:52 PM
does anyone know where i can find a wiring chart for a clifford system?  I am looking for a friend...it's the one that shocks people when they touch the car...




Posted By: auex
Date Posted: February 07, 2005 at 5:05 PM
Jolene? wrote:

does anyone know where i can find a wiring chart for a clifford system?  I am looking for a friend...it's the one that shocks people when they touch the car...


??????????????????????????????????????????

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.




Posted By: OmarR
Date Posted: February 07, 2005 at 9:21 PM
I think you would have to check with dealers in Africa.




Posted By: gcorrea
Date Posted: February 09, 2005 at 12:09 AM
or the one that spits fire  through the sides of the car.lol

-------------
gcorrea





Print Page | Close Window