Print Page | Close Window

programming time on compustar remote?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49601
Printed Date: May 18, 2024 at 11:29 PM


Topic: programming time on compustar remote?

Posted By: f00dstamps
Subject: programming time on compustar remote?
Date Posted: February 07, 2005 at 10:55 PM

how do you program the time on the compustar 2 way remote? i found no information relevant to this in the installation manual or the user's guide.



Replies:

Posted By: thepencil
Date Posted: February 07, 2005 at 11:05 PM
Press I and II at the same time for 2 second will get you in to the time setting program.

Press I again to set your hour.

Pressing II will allow you to set minute.


Once done you can wait 5 second and it will automatically exit you out of the time setting mode.

If that is too long of a wait pressing button I and II for 2 second will exit you out.


-------------
Be careful whose advice you buy, but be patient with those who supply it.posted_image





Print Page | Close Window