Print Page | Close Window

Help with Trunk release 97 Mitsu Diamante

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49712
Printed Date: May 03, 2024 at 5:27 PM


Topic: Help with Trunk release 97 Mitsu Diamante

Posted By: zanthius
Subject: Help with Trunk release 97 Mitsu Diamante
Date Posted: February 09, 2005 at 11:47 AM

Hey fellas,

I looked on the wiring charts here and on the starter manuf website and they both say that there is a wire for trunk release.  However, I have a mechanical wired trunk release.  Are these charts wrong????:o):  Or am I missing something?  There are no electrical wires running from the switch.  There are a couple running to the trunk latch.  But no actuator of any kind...Someone who's installed trunk release on this car please help!!




Replies:

Posted By: mo12v
Date Posted: February 09, 2005 at 12:17 PM
If you have a Mechanical Trunk Release, there is no hookup for it. 
U could put a Universal Power Trunk Release on, but it's no fun......

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: zanthius
Date Posted: February 09, 2005 at 12:18 PM

yea..i just ordered one....thanks.


Print Page | Close Window