Clifford 3.5 RSX remote problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49738
Printed Date: May 04, 2024 at 5:26 PM

Topic: Clifford 3.5 RSX remote problem

Posted By: jejrthompson
Subject: Clifford 3.5 RSX remote problem
Date Posted: February 09, 2005 at 5:22 PM

I have a Clifford 3.5 installed in my 2002 Mustang GT. Recently, the remote will not send commands to the system to arm/disarm. But, it will receive pages (i.e. valet mode notification). Does anybody have any ideas on the possible causes?

Replies:

Posted By: raydawg357
Date Posted: February 09, 2005 at 6:05 PM

Try reprogramming your remote.

-------------
Do it right the first time

Posted By: jejrthompson
Date Posted: February 09, 2005 at 6:11 PM

How? I have both the installation and owner's guides and neither really say how. I even tried to re-sync the code-hopping feature.

Posted By: raydawg357
Date Posted: February 09, 2005 at 6:17 PM

Turn the ignition forward and press the valet button once then hold. When you hear the alarm chirp, press the lock button on your remote. Release the valet button turn off the ign. This should do it.

https://www.directechs.com/guides/manuals/og/clifford/G919564_01-05.pdf

-------------
Do it right the first time

Posted By: sroth140
Date Posted: February 10, 2005 at 1:27 AM

unplug both ends of the antenna, then plug them both back in.

-------------
MECP certified installer

Posted By: jejrthompson
Date Posted: February 18, 2005 at 12:15 AM

That still didn't help. The remote will recieve the pages from the unit. It just won't send commands back.

Print Page | Close Window