Kill Switch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49776
Printed Date: February 06, 2026 at 10:41 PM

Topic: Kill Switch

Posted By: juanpito
Subject: Kill Switch
Date Posted: February 10, 2005 at 5:48 AM

I had my system for about 4yrs now. Commander 7000PC and a couple of days ago I notice that the Kill Switch doesn't work any more. Reason is I checking out the system trying everything out Door, Trunk, Hood, and checked to see if the car starts with the alarm on and it did. It was working before.

Is it maybe the Kill switch went bad?

How do I check if it's still work before I buy a new one.

Nissan Altima 96 GXE

-------------
Juan67

Replies:

Posted By: dare_ds69
Date Posted: February 10, 2005 at 6:11 AM

check the starter kill relay. when you arm the alarm the relay have to work you will hear a clic. plus 86 is your ignition, 85 ground when is armed and 30 motor side, 87a key side. check the 86 and 85 in the relay.

-------------
how own your mind, control your life.
MECP certified. always use a DMM

Posted By: juanpito
Date Posted: February 10, 2005 at 7:32 AM

Thanks, I'll check it out today....

-------------
Juan67

Print Page | Close Window