Disable Factory Alarm, 93 BMW 325i
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49906
Printed Date: April 19, 2024 at 1:36 PM
Topic: Disable Factory Alarm, 93 BMW 325i
Posted By: 325i
Subject: Disable Factory Alarm, 93 BMW 325i
Date Posted: February 11, 2005 at 4:37 PM
hello there could someone ,please tell me how to disable or shutt off bmw 325i 1993 security system???????? thanks witch wires have to cut/connect/
Replies:
Posted By: profuse007
Date Posted: February 11, 2005 at 5:54 PM
*1 The alarm plug is a black 12 pin plug located just behind the glove box. It is mounted with the pins facing you atop a vent just to the left of the body computer. Other wires at the alarm plug are: 12V- RED / white; Accessory- PURPLE / white; Siren- BLACK/ blue; Ground- BROWN / orange. Do not use the power sources at the alarm plug to operate high-current devices. The other side of the siren wire is mounted in a 2 pin plug at the passenger rear corner of the engine compartment. The other wire in the plug is a brown ground wire. DEI recommends attaching the siren at this point.
*7 If equipped with a factory alarm, the alarm will be plugged into the factory alarm plug. The only way to arm and disarm the factory alarm is with the factory remote. If your planning on using the 8360 pre-wired alarm harness the factory alarm must absent or removed.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
|