Print Page | Close Window

’98 Taurus Horn

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49940
Printed Date: May 28, 2024 at 3:24 PM


Topic: ’98 Taurus Horn

Posted By: skycruzr
Subject: ’98 Taurus Horn
Date Posted: February 12, 2005 at 8:24 AM

I installed a remote start on a '98 Taurus w/ little or no problem except for the horn.  I believe I found the proper wire, but it doesn't work.  Do I need a relay for this, or will it depend on the output?  R/S is EZ-2500 from Commando.  Thanks!

-------------
skycruzr



Replies:

Posted By: KarTuneMan
Date Posted: February 12, 2005 at 1:07 PM

Blue at the column....you might need a relay.....do you own a power probe, or multimeter?

Make sure it shown ground, with the DMM, then hit it with a solid ground.....HONK, no honk?

If you can ground it and HONK it, and the alarm does NOT....use a relay



-------------


Print Page | Close Window