Lancer Starting Prob. with Magicar F8100

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49948
Printed Date: May 14, 2025 at 1:49 AM

Topic: Lancer Starting Prob. with Magicar F8100

Posted By: santoz4u
Subject: Lancer Starting Prob. with Magicar F8100
Date Posted: February 12, 2005 at 11:45 AM

I have a 2002 mitsubishi Lancer and I installed a MAGICAR 2 WAY LCD remote starter/alarm system. The alarm works fine but It does remote start. It would not learn tach. The installar had hard time in programming the remote. All the wiring diagram are followed and checked many times and the installar is professional. Any Idea how to debug it?? I will be thankful for any help.

thanks

skn

Replies:

Posted By: KarTuneMan
Date Posted: February 12, 2005 at 12:49 PM

Where did he get the tach signal from?

-------------

Posted By: profuse007
Date Posted: February 12, 2005 at 2:22 PM

Tach Signal: BLACK / YELLOW or BLACK/ Green---Either ignition coil

two wires to grab from, take it back and tell teh dude to resolve it.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: santoz4u
Date Posted: March 16, 2005 at 8:54 PM

Hi Friends,

I have a Mitsubishi Lancer'02 model and I have installed a Magicar FAI 8100 alarm+ remote starter unit. I can't start the car in the first attempt If I press the start button for more than 3 seconds after arming the car. But If I switch off and again press the start button, it starts the car in the second attempt. And after getting in to the car I can't shut down the engine neither pressing the brakes nor taking out the key. I have to press the start button of the alarm unit to shut down the engine. Any help will be really appreciated.

thanks

santosh