05’ Ford Escape door trigger wire..

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49954
Printed Date: May 14, 2025 at 1:56 PM

Topic: 05’ Ford Escape door trigger wire..

Posted By: proinstall
Subject: 05’ Ford Escape door trigger wire..
Date Posted: February 12, 2005 at 1:54 PM

Ok.. i'm stumped.. the car falses on the pink wire in the dome light harness which is where its supposed to be.. it works fine when testing.. but after a while of sitting it sets the alarm off saying the door is/was open..

Anyone else have this same issue?

Replies:

Posted By: profuse007
Date Posted: February 12, 2005 at 2:44 PM

i assume youll need that wire to get the domelight to work so you cant diode it there.

youll need to grab antoher wire to diode isolate it from the GEM module. havent done this car but all the past ford w/ RKE have this issues.

trigger- (-) pink at the DKP/ door sill harness. this will grab all doors.

cut the wire, band of diode on trigger switch side along w/ the alarm (-) trigger input wire.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: mkaudio17
Date Posted: February 12, 2005 at 6:45 PM

sounds like sleepy doorlocks to me

-------------
Professionalism.