Code Alarm Remote Start help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50063
Printed Date: May 16, 2024 at 11:45 PM

Topic: Code Alarm Remote Start help

Posted By: achadwick23
Subject: Code Alarm Remote Start help
Date Posted: February 13, 2005 at 11:56 PM

Can someone please help me? Im doing a CA 645 and a CA 425 in a 2004... Scion tC....and nothign happens when i press a button?....am i missing a ground or something?? maybe do i have to program the remote??

Replies:

Posted By: daniel2002p
Date Posted: February 14, 2005 at 9:45 AM

do you have the BLACK/ white wire grounded????

-------------
2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

Posted By: achadwick23
Date Posted: February 14, 2005 at 10:35 AM

the dome light output wire??

Posted By: daniel2002p
Date Posted: February 14, 2005 at 9:36 PM

not that BLACK/ white. that wire is on the main harness. This one is on the same harness as the brake shutdown and tack wire, very small like 18 or 20ga. let me know what happens!!

-------------
2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

Posted By: JoshV
Date Posted: February 15, 2005 at 12:53 AM

Ummmm heres the deal with Code CA-425 brains.

1. You must have the door open to get into programing. So if you didnt hook up your door triggers....ground your green(neg door pin input)

2. Turn the key on, press the valet button until the siren chirps. Then press the lock button on your transmitters. This will program your remotes to that brain.

This should take care of your problem if not let me know because I have installed hundreds of those.

Posted By: JoshV
Date Posted: February 15, 2005 at 12:57 AM

daniel2002p wrote:

not that BLACK/ white. that wire is on the main harness. This one is on the same harness as the brake shutdown and tack wire, very small like 18 or 20ga. let me know what happens!!

The brake shutdown wire is in one of the ignition wire harness. And the Tach wire is in the main harness.

The only black and white wires on the brain are the dome light wire and there is one on the toggle switch that shuts the units remote start function on and off.

Posted By: Bmnicolosi
Date Posted: February 16, 2005 at 10:29 AM

program the remotes. follow directions given above

-------------
If you say "I already know how", don't ask me a single question.