Print Page | Close Window

need help with autostart

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50089
Printed Date: June 02, 2024 at 5:33 AM


Topic: need help with autostart

Posted By: for fun
Subject: need help with autostart
Date Posted: February 14, 2005 at 2:48 PM

hi everyone,

very new here but was hoping that someone can help. I have a clifford arrow3 alarm and did the remote start off the relay diagram here (10 relay total)

after all was done and doing the test. the car starts but about 2sec. later. it sounds like it is trying to start the car again and keeps doing this.

Did I do something wrong as I did follow the info. also wanted to know with the arrow3, it there a way I can control both the start and remote off?

I am using the output that was ettended for the remote trunk.

thanks alot :)




Replies:

Posted By: for fun
Date Posted: February 15, 2005 at 7:30 PM
anyone



Posted By: boomer_106
Date Posted: February 15, 2005 at 10:24 PM
It does say you may have to customize for the vehicle you are putting it into. You could doublecheck all your  wiring.  If you can afford it I think you may be better off adding an aftermarket unit. Maybe the Clifford Intellistart?


Print Page | Close Window