2003 Voyager alarm, power windows and locks

Hi All,

I've came across this great site while looking for resources to help help me install an alarm, power windows and locks in a basic 2003 Voyager. I found by this topic for a 2002 Voyager and wonder if it is the same for the 2003.

2002 Voyager

Also, when installing a the power windows and locks... Where would be the best source for +12v power for these accessories on this van. Btw, I'm using OEM window regulators with SPAL pod style switches and Autoloc 4-door lock kit.

While I am confident with my ability in installing these items. I probably leave the alarm and the remote start to a professional and do the power windows and docks myself.

Thanks,
Jd999

DIRECTWIRE™ WIRING INFORMATION - CHRYSLER / VOYAGER / 2003 / Accessory

12volts lt. blue/red (10A)   +   ignition harness
Notes: This wire is rated at 10 amps only. If installing any system with high current outputs, go to the battery for 12v.
Ignition pink/white   +   ignition harness
Parking Lights+ DO NOT USE       
Parking Lights- WHITE/ brown   -   headlight switch
Notes: The parking lights are negative trigger thru a 2.1K ohm resistor. There is a rest resistance on the wire, so MUST use a relay to isolate away from the switch. See directfax document #1082 for wiring information.
Headlight WHITE/ brown   -   headlight switch
Notes: the headlights are negative trigger thru a 790 ohm resistor. There is a rest resistance on the wire, so MUST use a relay to isolate away from the switch. See directfax document #1082 for wiring information.
Trunk/Hatch Release PURPLE / tan   -   conn. 2, pin 6 @ BCM
Notes: Hatch release is negative trigger thru a 1.69K ohm resistor. MUST use a relay.

The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Power Sliding Door PURPLE / blue   -   conn. 3, pin 1 @ BCM
Notes: Left power sliding door is negative trigger thru a 1.5K ohm resistor. Right power sliding door is negative trigger thru a 2.7K ohm resistor. MUST use relays.

The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Speed Sense blue/orange      PCM
Notes: The PCM (Powertrain Control Module) is behind the driver side headlight. VSS is in the gray plug, pin 66.
Wipers brn/wht & brn/org   +   windshield wiper motor
LF Window up/dn org/lt. green - org/white   A   driver window switch
RF Window up/dn org/tan - org/gray   A   driver kick panel
LR Window up/dn org/blue - org/lt. blue   A   driver kick panel
RR Window up/dn org/gray - org/green   A   driver kick panel
Sun Roof open/close          
Sun Roof Limit/close          
Memory Seat 1          
Memory Seat 2          
Memory Seat 3          
Immobilizer Bypass Module: Required: Yes Type: Sentry Key Part #: 555C, 556U, or 555U
Notes: Only vehicles with gray keys have the immobilizer.



      
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.



DIRECTWIRE™ WIRING INFORMATION - CHRYSLER / VOYAGER / 2003 / Remote Start


[PRINT THIS PAGE]


12volts lt. blue/red (10A)   +   ignition harness
Notes: This wire is rated at 10 amps only. If installing any system with high current outputs, go to the battery for 12v.
Starter yellow   +   ignition harness
Second Starter PURPLE / brown   -   ignition harness
Notes: The second starter wire is negative trigger thru a 180 ohm resistor. MUST use a relay. Refer to directfax document #1083 for wiring information.
Ignition pink/white   +   ignition harness
Second Ignition N/A       
Third Ignition N/A       
Accessory not required for remote start       
Second Accessory N/A       
Keysense          
Power Lock PURPLE / green   -   conn. 3, pin 21 @ BCM
Notes: Lock is negative trigger thru a 5.3K ohm resistor. Unlock is negative trigger thru a 2.0K ohm resistor. MUST use relays.

The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.

Can also use Directed 457C or 456L interface modules.
Power Unlock same wire as power lock       
Lock Motor tan/white      conn. 2, pin 10 @ BCM
Notes: The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Unlock Motor tan/lt. green      conn. 2, pin 28 @ BCM
Notes: The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Parking Lights+ DO NOT USE       
Parking Lights- WHITE/ brown   -   headlight switch
Notes: The parking lights are negative trigger thru a 2.1K ohm resistor. There is a rest resistance on the wire, so MUST use a relay to isolate away from the switch. See directfax document #1082 for wiring information.
Hazards          
Turn Signal(L)          
Turn Signal(R)          
Reverse Light          
Door Trigger     -   conn. 3 @ BCM
Notes: The driver door trigger is purple in pin 6, the passenger door is PURPLE / white in pin 7, the left sliding door is PURPLE / gray in pin 8, and the right sliding door is purple / YELLOW in pin 5. Use all four and diode isolate each. See directfax document #1076 for wiring information.

The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Dome Supervision use door trigger       
Trunk/Hatch Pin PURPLE / orange   -   conn. 3, pin 29 @ BCM
Notes: A diode must be placed inline on this wire to avoid problems with the dome lights and parking lights.

The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Hood Pin PURPLE / lt. blue   -   conn. 3, pin 30 @ BCM
Notes: The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Trunk/Hatch Release PURPLE / tan   -   conn. 2, pin 6 @ BCM
Notes: Hatch release is negative trigger thru a 1.69K ohm resistor. MUST use a relay.

The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Power Sliding Door PURPLE / blue   -   conn. 3, pin 1 @ BCM
Notes: Left power sliding door is negative trigger thru a 1.5K ohm resistor. Right power sliding door is negative trigger thru a 2.7K ohm resistor. MUST use relays.

The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Factory Alarm Arm PURPLE / lt. blue   -   conn. 3, pin 14 @ BCM
Notes: Arm is negative trigger thru a 1.5K ohm resistor, this will also lock the doors. Disarm is negative trigger thru a 9.1K ohm resistor, if use double pulse this will also unlock the doors. MUST use relays.

The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.

Can also use Directed 457C or 456L interface modules.
Factory Alarm Disarm same wire as alarm arm       
Disarm No Unlock          
Tachometer     ac   ignition coil pack
Notes: On the 2.4L use blue/green or blue/tan. On the 3.3L/3.8L use blue/green, blue/tan or blue/orange.
Wait to start N/A       
Brake Wire WHITE/ tan   +   brake pedal switch
Parking Brake          
Horn Trigger GREEN/ purple   -   steering column
Memory Seat 1          
Memory Seat 2          
Memory Seat 3          
Immobilizer Bypass Module: Required: Yes Type: Sentry Key Part #: 555C, 556U, or 555U
Notes: Only vehicles with gray keys have the immobilizer.



      
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.





DIRECTWIRE™ WIRING INFORMATION - CHRYSLER / VOYAGER / 2003 / Security


[PRINT THIS PAGE]


12volts lt. blue/red (10A)   +   ignition harness
Notes: This wire is rated at 10 amps only. If installing any system with high current outputs, go to the battery for 12v.
Starter yellow   +   ignition harness
Ignition pink/white   +   ignition harness
Power Lock PURPLE / green   -   conn. 3, pin 21 @ BCM
Notes: Lock is negative trigger thru a 5.3K ohm resistor. Unlock is negative trigger thru a 2.0K ohm resistor. MUST use relays.

The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.

Can also use Directed 457C or 456L interface modules.
Power Unlock same wire as power lock       
Lock Motor tan/white      conn. 2, pin 10 @ BCM
Notes: The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Unlock Motor tan/lt. green      conn. 2, pin 28 @ BCM
Notes: The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Disarm Defeat tan/brown      conn. 2, pin 26 @ BCM
Notes: The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Parking Lights+ DO NOT USE       
Parking Lights- WHITE/ brown   -   headlight switch
Notes: The parking lights are negative trigger thru a 2.1K ohm resistor. There is a rest resistance on the wire, so MUST use a relay to isolate away from the switch. See directfax document #1082 for wiring information.
Hazards          
Turn Signal(L)          
Turn Signal(R)          
Door Trigger     -   conn. 3 @ BCM
Notes: The driver door trigger is purple in pin 6, the passenger door is PURPLE / white in pin 7, the left sliding door is PURPLE / gray in pin 8, and the right sliding door is purple / YELLOW in pin 5. Use all four and diode isolate each. See directfax document #1076 for wiring information.

The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Dome Supervision use door trigger       
Trunk/Hatch Pin PURPLE / orange   -   conn. 3, pin 29 @ BCM
Notes: A diode must be placed inline on this wire to avoid problems with the dome lights and parking lights.

The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Hood Pin PURPLE / lt. blue   -   conn. 3, pin 30 @ BCM
Notes: The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Trunk/Hatch Release PURPLE / tan   -   conn. 2, pin 6 @ BCM
Notes: Hatch release is negative trigger thru a 1.69K ohm resistor. MUST use a relay.

The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Power Sliding Door PURPLE / blue   -   conn. 3, pin 1 @ BCM
Notes: Left power sliding door is negative trigger thru a 1.5K ohm resistor. Right power sliding door is negative trigger thru a 2.7K ohm resistor. MUST use relays.

The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.
Factory Alarm Arm PURPLE / lt. blue   -   conn. 3, pin 14 @ BCM
Notes: Arm is negative trigger thru a 1.5K ohm resistor, this will also lock the doors. Disarm is negative trigger thru a 9.1K ohm resistor, if use double pulse this will also unlock the doors. MUST use relays.

The BCM (Body Control Module) is in the driver kick panel near the parking brake. It has 5 plugs in it, one 6 pin plug and four 34 pin plugs.

Can also use Directed 457C or 456L interface modules.
Factory Alarm Disarm same wire as alarm arm       
Disarm No Unlock          
Tachometer     ac   ignition coil pack
Notes: On the 2.4L use blue/green or blue/tan. On the 3.3L/3.8L use blue/green, blue/tan or blue/orange.
Horn Trigger GREEN/ purple   -   steering column
Memory Seat 1          
Memory Seat 2          
Memory Seat 3          
Immobilizer Bypass Module: Required: Yes Type: Sentry Key Part #: 555C, 556U, or 555U
Notes: Only vehicles with gray keys have the immobilizer.



      
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.







-------------
Be careful whose advice you buy, but be patient with those who supply it.