The chrysler horn pulse problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50246
Printed Date: May 19, 2024 at 1:25 AM

Topic: The chrysler horn pulse problem

Posted By: dc5r
Subject: The chrysler horn pulse problem
Date Posted: February 16, 2005 at 4:02 PM

I need to extend the ground signal from my alarm unit so I can actually hear the horn. Could anyone hear teach me how to do that with relays?

Replies:

Posted By: KarTuneMan
Date Posted: February 16, 2005 at 4:44 PM

When you post.....give vehicle info too.

It sound like the horn, when triggered, is whimpy sounding.....correct. Ya sure ya got the correct wire? If you do, use a relay to beef up the ground.

-------------

Posted By: dc5r
Date Posted: February 16, 2005 at 4:49 PM

yup thats exactly the problem, i have a caravan. So how would I beef it up with a relay?

thanks

Posted By: dc5r
Date Posted: February 16, 2005 at 4:50 PM

I'm using an external or an extra horn i found just for the keyless entry unit. so i'm not touching the stock horn wiring at all

Print Page | Close Window