Print Page | Close Window

Viper 791xv Lock/Unlock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50401
Printed Date: May 16, 2024 at 6:39 PM


Topic: Viper 791xv Lock/Unlock

Posted By: azn13oy781
Subject: Viper 791xv Lock/Unlock
Date Posted: February 18, 2005 at 5:17 PM

I have a 00 acura integra and I'm trying to figure out why my lock and unlock switch doesnt work. I confused on how to connect the relay (black box) from the alarm to the main BLACK/ white and BLACK/ red wire. There's like five wires comming out from that black relay but i only used the two wires that  was the blue and green one comming from the relay. nothing works. i only hear clicking noises from the main alarm unit itself.  can anyone help?




Replies:

Posted By: xtreme069
Date Posted: February 21, 2005 at 5:49 AM
not sure what this black box is you are talking about the locking wires in the vehicle should connect straight to the main alarm module the white three pin plug that has a green and a blue wire coming from it let me know what this black box is and were it ties into the alarm is it a 451m?

-------------
I Love This Industry!!



Posted By: profuse007
Date Posted: February 21, 2005 at 6:22 AM
no need to use the 451m (black box), only use the green and blue wire. green- lock, blue-unlock.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).



Posted By: daniel2002p
Date Posted: February 21, 2005 at 7:25 AM
on the "black box" if you ground the purple wire, it will work.

-------------
2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!


Print Page | Close Window